PerTronix 510 Digital HP Ignition Box, Black

Description

Produces over 187 MJ of spark energy, which is 30% more than competition, Features a RPM activated trigger to accurately control shift lights, solenoids and other RPM devices, Comes with a locking automotive connector for clean wire routing with positive wire harness retention, Includes an adjustable start retard for easier starting on high compression and hard to start engines, Has an integrated 3 step digital REV limiter for burnout and launch control plus fatal over REV protection
PerTronix 510 Digital HP Ignition Box, Black
Sku # 447510
Mfr. Part # 510
Condition
New
Brand
PerTronix
Sold
Each
Details
Notes
Operating Voltage: 9-22 Volts
Cranking Voltage: 8-22 Volts
Current Draw: 1.2A per 1000 RPM
Input Trigger: Points, Electronic Ignition, or Mag Pickup
Output Voltage: 530 Volts
Output Energy: 187+mJ Primary Spark
Tach Output Signal: 12 Volt square wave, 50% duty cycle
Multi-Spark Windows: Up to 20 crank degrees
Start Retard: Adjustable 0-18 degrees / 500-1400 RPM
Housing: 6061-T6 Aluminum
Finish: Hard Anodized Black or Silver
Weight: 0.7 lbs
Length: 4.18 Inches (5.15" with connector)
Width: 3.75 Inches
Height: 1.65 Inches
Mounting Bolt Pattern: 3.5" X 3.25"
Info
This PerTronix Digital HP Ignition Box comes equipped with 187 mJ of spark energy, 2 step digital REV limiter, multiple spark to 7,000 RPM, RPM activated trigger, ultra small form factor, and adjustable start retard. The locking Molex connector, tachometer output lead, and onboard diagnostics with tach calibration only add to its many features. Available in a black anodozied finish.
Over 187 MJ of spark energy - 30% more than competition
Integrated 3 step digital REV limiter for burnout and launch control plus fatal over REV protection
RPM activated trigger to accurately control shift lights, solenoids and other RPM devices
Ultra small form factor - 70% smaller than competition for greater installation options
Adjustable start retard for easier starting on high compression and hard to start engines
Locking automotive connector for clean wire routing with positive wire harness retention
Tachometer output lead - pure digital tach signal plus added filters for OE tachometer compatibility
Onboard diagnostics and tach calibration - run system test with easy to use rotary switch and LED feedback
(PDF)
Charts
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive an only legally be installed on vehicle applications in the State of California in accordance with the California Air Resource Board (CARB) Executive Order (E.O.). Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only this part on an application listed in the EO.
Specs
Warranty
1 Year
Circuitry
Digital
Data Acquisition
No
Overall Height
1.63
Overall Width
3.75
Overall Length
4.13
MFG. Part #
510
Rev Limiter Included
Yes
Ignition Box Color
Black
Timing Retard
One-stage
Ignition Box Output
Capacitive/Inductive Discharge
Primary Voltage
530 V to coil
Spark Output
187 mJ
Current Draw
1.2A/1000 RPM
GTIN Code
901277287920
Reviews
Great product
Rated
by Tommy on February 29, 2020
Summary:
Easy to install
Yes, I recommend this product.
yes
Rated
by jb on September 30, 2018
Summary:
too soon to tell
Related Items / Suggested Parts
PerTronix 512 Digital HP Ignition Box, Silver
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.