TARAMPS Amplifier 4 Channel TS 400x4 Class D Full Range Car Audio 2 Ohms 400W

Description

TS 400x4
The TS 400×4 is multichannel, with 4 channels of 100 Watts RMS, with a maximum power of 400 Watts RMS and with an impedance of 2 ohms. The TS 400×4 is FULL RANGE playing all frequencies in the right measure for you. It has thermal and short-circuit protection, in addition to the indicative LED and crossover.
Highest Perfomance
Amplifier module from Taramps was developed with the highest performance for the most varied types of automotive sound systems.
Functions and Inputs
INPUT
Inputs of signals to be amplified.
LEVEL
It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels.
CROSSOVER
Set the operating mode of amplifier.
Output and Power Supply Connector
OUTPUT
To connect the speakers. Follow the polarity and the minimum impedance recommended.
POWER
The connector terminal (+) must be connected to the battery's positive pole with a 4mm² (minimum) wire gauge. The connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge.
Performance
Subwoofer
Woofer
6”x9” Speaker
6” Speaker
2 - Way Speakers
Phenolic Driver
Titanium Driver
Super Tweeter
Low
Mid
High
Technical Features
Operation Class
Class D
Number of Channels
04
Maximum Power
@ 13,8 VDC - 2 OHMS - 400 W RMS (4 x 100W RMS)
@ 13,8 VDC - 4 OHMS - 252 W RMS (4 x 63W RMS)
Bridged @ 13,8 VDC - 4 OHMS - 400W RMS (2 x 200W RMS)
INPUT SENSITIVITY
200mV (Vol = max.)
Frequency Response
(Full Range): 18 Hz to 30 kHz (-1dB)
Crossover High Pass(HPF)
90 Hz (-12dB/8th)
Crossover Low Pass(LPF)
90 Hz (-12dB/8th)
Protection System
Thermal and Output Short
Maximum Music Consumption
@13,8VDC: 16.5A
Maximum Consumption in Sinusoidal Signal
@13,8VDC: 33A
Dimensions(H X W X D)
5.43" x 1.93" x 4.76"
Weight
1.32lb
Warranty
1 year warranty
Taramps recommends that the installation be done by a specialized professional and is not responsible for the misuse of the product.